Ordered to load requirements when the following detail is requested:

• Free Length (F/L)
• Load in lbf, N or Kgf at loaded length (L/L)
• Rate lbf load per inc (kgf) load per mm.
• Maximum compression
• Maximum solid length
• Diameter, maximum outside (O/D), minimum inside (I/D) or mean diameter (M/D)
• Right hand or left hand wound, if essential
• Type of ends (see right hand column)
• Material and finish
• Tolerances and special working conditions

Parallel, Barrel or Conical shaped springs

• Free Length (F/L)
• Diameter, maximum outside (O/D), minimum inside (I/D)
• Wire size (d) and section.
• Number of coils, working or total or pitch
• Right hand or left hand wound, if essential
• Type of ends
• Material and finish
• Tolerances and special working conditions

Stainless Steel Springs Bronze Springs COMPRESSION SPRINGS Indian  India suppliers exporters manufacturers wire products  Springs