BRASS INSERTS BRASS MOULDING INSERTS

 

Brass inserts Brass Moulding Inserts Brass Injection Moulding Brass Rotomoulding Molding inserts Plastic inserts Plastic Moulding inserts plastic cold inserts molding Plastic hot inserts moulding insert moulding 

Brass inserts Brass Moulding Inserts Brass Injection Moulding Brass Rotomoulding Molding inserts Plastic inserts Plastic Moulding inserts plastic cold inserts molding Plastic hot inserts moulding insert moulding   

Brass inserts Brass Moulding Inserts Brass Injection Moulding Brass Rotomoulding Molding inserts Plastic inserts Plastic Moulding inserts plastic cold inserts molding Plastic hot inserts moulding insert moulding   Brass inserts Brass Moulding Inserts Brass Injection Moulding Brass Rotomoulding Molding inserts Plastic inserts Plastic Moulding inserts plastic cold inserts molding Plastic hot inserts moulding insert moulding

 Brass inserts Brass Moulding Inserts Brass Plastic Moulding Inserts Brass Plastic Molding inserts Brass Injection Moulding Inserts Brass Injection Molding Inserts Brass roto molding Roto moulding inserts Brass inserts for cold moulding Hot insert molding

Special Features :

  • Threads as per International Go & Not Go Standards. Brass Stainless Steel Nuts Moulding inserts molding nuts 
  • Deep Groove for maximum Pull Out Resistance.
  • Inner Diameter (I/D) after Threads with very close tolerance to prevent unnecessary flush to enter into the inserts.
  • Knurling Available :
    • Diamond
    • Straight
    • Unidirectional
  • Both blind and through inserts are available with no minimum Qty.

 Special Brass inserts Moulding Inserts Molding Brass inserts Available
 We shall be pleased to develop Non-Standard Brass inserts components  nuts screws studs fixings wood screws machine screws fasteners as per specific requirements.
 Materials
 Brass to BS 2874 / 2872
 Finish
 Brass natural, Electro-Tinned, Nickel etc.
 Threads
  ISO Metric, BSW, BA, BSF, UNC, UNF UNEF etc.

  Threads: 2mm 3mm 4mm 5mm 6mm 8mm 10mm 12mm 16mm 20mm 25mm 32mm
1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1" 11/8" 11/4" 11/2" 13/4" 2"

 

  Manufacturers Exporters suppliers India Asian Indian Manufacturer Jamnagar Supplier