Stainless Steel Springs
Stainless Steel Springs securely hold pool safety covers in place throughout the winter. The springs attach to the Brass Deck Anchors and can be used to replace old springs or as spares for a new cover installation. Each Spring is approximately 8 inches in length.
Ordered to load requirements when the following detail is requested:
- Free Length (F/L)
- Load in lbf, N or Kgf at loaded length (L/L)
- Rate lbf load per inc (kgf) load per mm.
- Maximum compression
- Maximum solid length
- Diameter, maximum outside (O/D), minimum inside (I/D) or mean diameter (M/D)
- Right hand or left hand wound, if essential
- Type of ends (see right hand column)
- Material and finish
- Tolerances and special working conditions
Parallel, Barrel or Conical shaped springs :
- Free Length (F/L)
- Diameter, maximum outside (O/D), minimum inside (I/D)
- Wire size (d) and section.
- Number of coils, working or total or pitch
- Right hand or left hand wound, if essential
- Type of ends
- Material and finish
- Tolerances and special working conditions
Spring Materials :
- Carbon Steel Springs
- Stainless Steel Springs
- Phosphor Bronze Springs
- Brass Springs
- Beryllium Copper Springs
- Oil Tempered Steel
- Other materials to special order
Finish And Coating :
- Natural, Nickel Plated, Tin Plated or any coating as per customer specification.
Any kind of special Stainless Steel Springs Bronze Springs Compression Springs can be developed and supplied exactly as per customer specifications.